PPG INDUSTRIES INC -- DELSTAR ACRYLIC ENAMEL (9000) DAR-1 (022089M) -- 8010-00N048626 
=====================  Product Identification  =====================

Product ID:DELSTAR ACRYLIC ENAMEL (9000) DAR-1 (022089M)
MSDS Date:05/18/1993
FSC:8010
NIIN:00N048626
=== Responsible Party ===
Company Name:PPG INDUSTRIES INC
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:47695
=== Contractor Identification ===
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER
    W/2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (2,2,4 TRIMETHYL 1,3 PENTANEDIOL
    ISOBUTYRATE)
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (LIGHT
    AROMATIC SOLVENT NAPHTHA)
CAS:64742-95-6
RTECS #:WF3400000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC; (MEDIUM
    ALIPHATIC SOLVENT NAPHTHA)
CAS:64742-88-7
Fraction by Wt: 1-2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:FILM FORMERS, RESINS AND ADDITIVES
Fraction by Wt: 45-50%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:EFTS OF OVEREXP: PROD CNTNS TITANIUM DIOXIDE. ANIMALS
    INHALING MASSIVE QTYS OF TITANIUM DIOXIDE DUST IN LONG- (ING 9)
RTECS #:9999999ZZ

Ingred Name:ING 8: TERM STUDY DEVELOPED LUNG TUMORS. STUDIES W/HUMANS
    INVOLVED IN MANUFACTURE OF THIS PIGMENT INDICATE NO (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: INCREASED RISK OF CANCER FROM EXPOS. POTNTL FOR
    INHAL OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY (ING 11)
RTECS #:9999999ZZ

Ingred Name:ING 10: LIMITED. SINCE OVEREXPOSURES ARE NOT EXPECTED,
    THERE IS NO SIGNIFICANT HAZARD FOR MAN.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC: CONTACT POISON CONTROL CENTER, EMERGENCY
    ROOM OR MD IMMEDIATELY; HAVE MSDS INFO AVAILABLE.
RTECS #:9999999ZZ

Ingred Name:RESP PROT: DETERMINE TYPE OF AIRBORNE CONTAMINANTS AGAINST
    WHICH RESP IS EFTIVE & HOW IT IS TO BE PROPERLY FITTED.
RTECS #:9999999ZZ

Ingred Name:VENT: LIMITS, THE LEL BELOW THE STATED LIMIT & TO REMOVE
    DECOMPOSITION PRODUCTS DURING WELDING OR FLAME CUTTING.
RTECS #:9999999ZZ

Ingred Name:PIGMENTS
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 55-60%
OSHA PEL:100 PPM
ACGIH TLV:100 PPM; 150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313) (CERCLA)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 5-10%
OSHA PEL:200 PPM
ACGIH TLV:200 PPM; 300 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
    EYES: CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL
    DISTURB MAY INDICATE EXCESS EYE CNTCT. SKIN: MAY CAUSE MOD IRRIT.
    DRYNESS, ITCH, CRACKING, BURNING, RED NESS & SWELL ARE CNDTNS ASSOC
    W/EXCESS CNTCT. INHAL: VAP & MIST MAY BE HARMFUL. VAP IRRIT EYES,
    NOSE & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: THROAT. EYE WATERING, HDCH, NAUS,
    DIZZ & LOSS OF COORDINATION ARE INDICATIONS THAT SOLV LEVELS ARE
    TOO HIGH. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS
    & PERM BRAIN & NERVOUS S YS DMG. INTENTIONAL MISUSE BY DELIB CONC &
    INHAL CONTENTS CAN BE HARMFUL/FATAL. AVOID LONG TERM & RPTD CNTCT.
    (ING 8)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH EYES IMMED W/PLENTY
    OF WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
    FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER IF MATL APPEARS
    TO ADHE RE TO SKIN. INHAL: REMOVE TO FRESH AIR.APPLY ARTF RESP &
    OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF INGEST, ANY TYPE OF
    OVEREXP OR SYMPS OF OVEREXP OCCUR DURING/FOLLOWING USE OF PROD,
    (ING 12)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:79.0F,26.1C
Lower Limits:1.0%
Extinguishing Media:NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM OR
    UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS
    (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
    HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
    EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED
    W/PROPER NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE
    PERMITTED IN AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED
    MATL W/SAWDUST, VERMICULITE OR OTHE R ABSORB MATL & PLACE INTO
    CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS IC FLAMMABLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT SYS,
    READ THE MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS RSLTG
    MIX MAY HAVE HAZS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
    POURING. AVOID FRE E FALL OF LIQS IN EXCESS OF FEW INCHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
    CTLS, VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C- AIR
    PURIFYING/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS. READ
    RESP MFR'S INSTRUCTI ONS & LITERATURE CAREFULLY TO (ING 13)
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
    KEEP CONC OF INGREDS BELOW LOWEST SUGGESTED EXPOS (ING 14)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . CLEAN OR DISCARD CONTAMINATED CLOTHING &
    SHOES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: 1C FLAMM LIQ FIRES. FIRE FIGHT PROC: POSS AUTOIGNIT/EXPLO
    WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF.
    EXPLO HAZ: SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY 
    FLAME OR HOT SURFS. HAZ DECOMP PRODS: OXIDES OF NITROGEN.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:5-11
Vapor Density:HVR/AIR
Spec Gravity:1.0-1.2
Evaporation Rate & Reference:86 (BUOAC=100)
Solubility in Water:0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
    SOLVENTS LISTED IN INGREDIENT
Percent Volatiles by Volume:53-63

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
    OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING, FLAME CUTTING MAY PRDCE FUMES INCL CARBON
    MONOXIDE, (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
    THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.